Industrial Masking Products
Browse our comprehensive range of high-performance masking supplies. Filter by category or search for specific products.
Blue Polyester Masking Tape
Blue Polyester masking tape is a thin tape with a thick adhesive layer. Ideal for masking rougher surfaces (e.g. cast or sand blasted material), also performs well when masking tight bends, due to it's thin backing.
Green Polyester Masking Tape
Green Poly masking tape is a versatile masking tape suitable for many applications. Formulated with a thick adhesive layer to ensure secure masking with clean surface treatment lines.
Green Polyester Tape with Liner
Green Poly Tape (with Liner) is a polyester tape with silicone adhesive on a liner, allowing it to be cut into custom shapes using plotter machines. Note: the liner is 0.8" wider than the tape. 19.7" tape -> 20.5" total width. This reduces glue build up in the cutting machine, minimizing maintenance.
Polyimide Masking Tape
Polyimide masking tape is a high-performance masking tape with excellent chemical resistance, suitable for applications requiring extended high temperature resistance such as high temperature curing or PCB masking.
Polyimide Tape with Liner
Polyimide (Kapton) Tape with Liner is a polyimide tape with a silicone adhesive on a PET liner, allowing it to be cut into custom shapes by hand or with a plotter machine.
Crepe Masking Tape
General purpose crepe paper masking tape for light-duty masking applications.
Glass Cloth Tapes
Designed for demanding industrial masking applications, this glass cloth tape withstands prolonged high-temperature exposure and is ideal for thick coatings. Its durable woven backing and heat-resistant silicone adhesive ensure clean removal.
Flangeless Silicone Plugs
Flangeless silicone plugs are used to mask threaded holes while leaving the surrounding surface unmasked. They are suitable for both low- and high-temperature processes.
Hollow Tapered Silicone Plugs
Hollow tapered plugs offer a cost-effective alternative to solid versions, especially in larger dimensions. Designed for versatile applications, they perform well in both low- and high-temperature processes.
Silicone Dual Flanged Pull Plugs
Weld Nut Plugs have two flanges to protect both leading and exit thread. They are designed to mask weld nuts, as well as other threaded or unthreaded holes during low and high temperature processes.
Silicone Mousetail Plugs
Pinhole plugs are designed to tightly mask small holes by being pulled into place, allowing an oversized plug to be used.
Silicone Pull Plugs
Pull plugs are designed to ensure a tight fit by being pulled into position. They are suitable for masking threaded and unthreaded through-holes in both low- and high-temperature processes.
Silicone Thread Plugs
Thread Plugs are designed to mask threaded holes as well as the leading thread but can also be used to mask non threaded holes with countersink. The handle allows for easy placement and removal. They are suitable for both low- and high-temperature processes.
Silicone Washer Plugs
Washer plugs have two sides with different diameters, combined with a flange to mask the contact face surrounding the hole. Suitable for low and high temperature processes.
Silicone Washer Pull Plugs
Washer pull plugs are designed to protect threaded and unthreaded holes as well as the contact area around them. Suitable for low and high temperature processes.
Square Silicone Plugs
Square silicone plugs are designed to mask both square and round holes. They are suitable for low- and high-temperature applications and can be reused multiple times.
Tapered Silicone Plugs
Tapered plugs are the most widely used type, available in a broad range of sizes. They are suitable for both high- and low-temperature processes.
Tapered Silicone Plugs with Handles
Tapered plugs with handles offer the same versatility as standard tapered plugs. The handle allows for easier placement and removal, especially in hard-to-reach areas. Suitable for both high- and low-temperature processes.
Threaded Silicone Plugs
Threaded silicone plug designed for reliable masking of threads. The short thread allows to quickly screw the plug into place, ensures a tight seal and minimises the risk of plug displacement during processing.
Round Silicone Caps
Silicone Caps are the most widely used type masking cap for protecting studs, bolts, and shafts. Silicone caps are available in a broad range of sizes and can be used in both low- and high-temperature processes.
Rectangular Silicone Caps
Rectangular silicone caps are specifically designed to mask electrical tabs. The chamfered edge ensures that the processing medium reaches the bottom of the tab well. Suitable for both low- and high-temperature processes.
Silicone Caps with Flanges
Silicone Caps with Flanges are is designed to mask studs and bolts, as well as the surrounding spot face. They can also be used as a plug for both threaded and unthreaded holes. Suitable for both low- and high-temperature processes.
Silicone Caps/Plugs with Flanges
The cap/plug with a flange is designed for dual use as both a cap and a plug. The flange protects the leading thread or countersink of threaded and non-threaded holes. Suitable for both high- and low-temperature applications.
Green Polyester Masking Discs
Die-Cut Polyester Masking Discs are used in high-temperature processes such as powder coating to mask circular areas. They ensure clean finishing lines and allow for easy removal.
Green Polyester Masking Donuts
Die-cut Polyester Masking Donuts are used in high-temperature processes such as powder coating. They ensure clean finishing lines and allow for easy removal.
Green Polyester Masking Squares
Die-cut polyester masking squares are used in high-temperature processes such as powder coating. They ensure clean finishing lines and allow for easy removal.
Polyimide Masking Discs
Polyimide die-cut masking discs are used for masking in high-temperature processes or applications requiring exceptional chemical resistance .
Polyimide Masking Donuts
Die-cut polyimide masking donuts are used for masking in high-temperature processes or applications requiring exceptional chemical resistance .
Polyimide Masking Squares
Polyimide die-cut masking squares are used for masking in high-temperature processes or applications requiring exceptional chemical resistance .
Silicone Sheet
Our silicone sheet is a reusable masking solution, perfect for larger surfaces. It can be easily cut to the desired shape and size for your specific masking needs. Contact us!
Silicone Tube
Silicone tube is ideal to mask bolts, and shafts of various lengths - just cut to size as needed. Suitable for low and high temperature processes.
Duct Tape - Silver
This fabric tape is a heavy-duty rubberized fabric tape with a thickness of 9.5 mil.It is highly durable and a go-to solution for masking when sand blasting or other kinds of abrasive blasting.
Aluminium Foil Tape
High-temperature aluminium foil tape for extreme heat applications and thermal insulation. Excellent reflectivity and heat resistance.